Declaration Of Conformity - Inficon TEK-Mate Manual De Operación

Declaration Of Conformity

This is to certify that this equipment, designed and manufactured by INFICON Inc., 2
Technology Place, East Syracuse, NY 13057 USA meets the essential safety requirements of
the European Union and is placed on the market accordingly. It has been constructed in
accordance with good engineering practice in safety matters in force in the Community and
does not endanger the safety of persons, domestic animals or property when properly installed
and maintained and used in applications for which it was made.
Equipment Description . . . . . . . . . . . . . . TEK-Mate® Refrigerant Leak Detector
Applicable Directives . . . . . . . . . . . . . . . 2006/95/EC(LVD)
Applicable Standards . . . . . . . . . . . . . . . EN61010-1: 2010 EN55011, Group 1,
CE Implementation Date. . . . . . . . . . . . . Sept 8, 2014
Authorized Representative . . . . . . . . . . . Brian King
Any questions relative to this declaration or to the safety of INFICON's products should be
directed, in writing to the quality assurance department at the above address.
Specification Table in Accordance with EN 14624
Minimum sensitivity to R134a, fixed (static)
Maximum sensitivity to R134a, fixed (static)
Minimum sensitivity to R134a, moving (dynamic)
Maximum sensitivity to R134a, moving (dynamic)
Minimum response/detection time
Zeroing time
Recovery time for 50 g/yr exposure*
Minimum sensitivity in contaminated environment
Calibration frequency: Check annually with calibrated leak standard.
*Upper leak detection limit is not specified by INFICON as there is no upper limit to the size
of the leak the detector is able to detect. As no 50 g/yr leak standard was available during
testing, a 31 g/yr leak was substituted.
W A R N I N G
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the instrument.
TEK-Mate®, Toolbox Tough™ and INFICON® are trademarks of INFICON Inc.
DURACELL® is a registered trademark of Duracell Inc.
2004/108/EC(EMC)
2011/65/EU(RoHS)
Class A: 2010 EN 61000-6-1:2007
EN14624:2012
Business Line Manager
Service Tools
2
2 g/yr
>50 g/yr
2 g/yr
>50 g/yr
<1 second
5-7 seconds
12 second
2 g/yr