b) Manual preset operation
Choose which stations to save in preset memory instead of scanning them
automatically.
1. Select the radio station you wish to save by using
button (5).
2. Press P-MODE/M. button and "P01" will flash on the display to indicate the unit
is saving it as preset station P01. To change the preset memory number, press
FOLDER/10/M. + (12) or FOLDER/10/M. - (7) buttons.
3. Press P-MODE/M. button to complete the preset operation.
4. To save another station, repeat the 3 steps above.
Note: The unit can save up to 30 radio stations within the reception range.
Tuning
a) Manual tuning
1. Press shortly
frequency.
2. You can also press and hold
radio frequency.
b) Automatic tuning
1. To tune the next preset station, press FOLDER/10/M. + button.
2. To tune the previous preset station, press FOLDER/10/M. - button.
Previous/Next
In USB, AUX IN and Bluetooth® functions:
1. Press shortly the button
2. Press shortly the button
Volume
Rotate the VOLUME knob to the right to increase (+) or to the left to decrease (-)
the volume.
CAUTION: Too high volume can damage your hearing. For this reason, please
turn the volume down.
Light
Press shortly the light button (7) to turn the light around the speaker on and off.
When turned on, the light flashes in rhythm with the music or with the voice on
the mic.
K8100_IM1316_V14_303.indb 23
/TUN.+ or
/TUN.- button to choose the desired radio
/TUN.+ or
to get back to the previous track.
to listen to the next track.
23
/TUN.+ (9) or
/TUN.- button to search up a
/TUN.-
4/8/16 3:42 pm