Centrometal CentroPelet ZS Serie Manual Del Usuario página 37

6.1 Cleaning of the combustion chamber (once a month)
To access the scraper, it is necessary
to slide the front panel along its
rails.
Remove the brazier.
All manuals and user guides at all-guides.com
Extract the scraper by lifting the
black knob. Activate 5/6 times the
scraper by raising and lowering the
knob to make sure on the cleanliness
of the heat exchange pipes.
Remove the combustion chamber
floor with the aid of a screwdriver.
Open the door and extract the ash
tray. Remove with an aspirator all
the ash deposited within it. This
operation can be carried out more
or less frequently depending on the
amount of pellets used.
Remove the upper flame beater
by pulling it with an open hand
towards you.
37