Cleaning, Care & Maintenance; Technical Specifications; Electrical Wiring - Buffalo GH227 Manual De Instrucciones

Telephone Helpline: 0845 146 2887
Cleaning, Care & Maintenance
Disconnect from electricity supply, allow to cool before emptying the water from the Body, always use fresh water when the kettle
is to be used.
Always wash the Kettle Liner, Top Ring and Lid after every use. Wipe both exterior and interior of the Body to remove any food
residues, do not immerse the Body in water or clean with a pressure washer.
Trouble Shooting

Technical Specifications

Code Voltage
GH227 230V/50Hz

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 3 amp fuse as standard. The plug is to be
connected to a suitable mains socket. The appliance is wired as follows:
Live wire (coloured brown) to terminal marked L
o
Neutral wire (coloured blue) to terminal marked N
o
Earth wire (coloured green/yellow) to terminal marked E
o
This appliance must be earthed, using a dedicated earthing circuit. If in doubt, consult a qualified electrician. Electrical isolation
points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily
accessible
Disposal
The WEEE logo on this product or its documentation indicates that the product must not be disposed of as
household waste. To help prevent possible harm to human health and/or the environment, the product must be
disposed of in an approved and environmentally safe recycling process. For further information on how to
dispose of this product correctly, contact the product supplier, or the local authority responsible for waste
disposal in your area
Power Watts Current Amps
300 1.3
Dimensions mm Weight Kgs
348 x 255Ø
UK
3.4kg