Cleaning; Maintenance And Service - wissner-bosserhoff SafeLift Manual De Instrucciones

6. Cleaning

The controller must be cleaned regularly. This is ideally done by wiping it down with a disinfec-
tant. The following cleaning agents can be used:
- Isopropanol (required according to EN 60601-1 Art. 6.1)
- Denatured alcohol (required according to EN 60601-1 Art. 6.1)
– Terralin
– Perform
- Microbac Forte
Caution!
When cleaning/disinfecting the controller, care must be taken not to wipe it too wet,
as otherwise moisture can get inside between the buttons.

7. Maintenance and service

SafeLift is low maintenance. During product development, attention was paid to ensure that
servicing work was reduced to a minimum, keeping operating costs low.
In daily use, however, experience shows that products are also sometimes handled carelessly,
and this can also contribute to them aging more quickly and to the wear of certain compo-
nents, on which the manufacturer can have no direct influence.
For this reason, routine maintenance checks should be performed by the operator – this
should also be done to guarantee the availability of the system, which is in the operator's own
interest. We recommend servicing the SafeLift once a year, together with the service of the
nursing home bed.
Warranty or guarantee claims can only be enforced if the product has been serviced and main-
tained regularly and in accordance with the instructions for use and the operation and safety
instructions in these instructions for use.
Only trained operators and maintenance technicians can ensure proper handling and use.
wissner-bosserhoff's technical customer service offers servicing and necessary training on all
aspects of the product.
If a function check, an inspection, measurement or servicing reveals serious defects that
cannot be rectified, the product must be suspended from further use.
Our customer service is available to you for any inquiries and to provide training and servicing.
44
- Pure Dismozone
- Microcid
- Termosept