Dictator H 1300 Instrucciones De Instalación página 4

INSTALLATION
Installation position
The door damper H 1300 is installed vertically more or less in the centre of the door leaf. The
upper edge of the casing should stand out about 1 mm from the upper edge of the door leaf.
(see "Dimensions").
Installation of the hook
The hook is fixed to the frame so that the rubber roller enters centred. The hook is at the correct
height when the rubber roller on the bent lever barely touches the front edge of the hook when
closing.
Installation accessories
For installation on thin-walled steel doors an additional mounting plate should be used
(part no. 205213).
In case the hook cannot be fixed onto the frame through all 4 holes, there is a mounting
plate available (part no. 205231XL).
Further information on the dimensions can be found under "Installation accessories".
Questions?
We'll be happy to help! Just contact us!
4
DICTATOR Technik GmbH · +49 (0)821 246730 · info@dictator.de · en.dictator.de
Installation instructions - Door damper H 1300