Grafik Eye GRX-CI-NWK-E Instrucciones De Instalación página 3

A/V Connections and Signal/Link Information
GRX-CI-NWK-E, GRX-IA-CI-NWK-E, OMX-CI-NWK-E
CAT5 Cable:
maximum 328 ft.
(100 m)
Ethernet link (on) Ethernet speed
Ethernet activity (10: off; 100: on)
(flashing)
Data Link (to
RJ45 jack:
Control Units,
Ethernet Link
processors,
and
wallstations)
GRX-CI-RS232, GRX-IA-CI-RS232, OMX-CI-RS232
maximum 50 ft.
COM
TxD
RxD
RS232
Link
GRX-CI-PRG, GRX-IA-CI-PRG, QSE-CI-NWK-E
Links and connections are same as shown for
above units.
R
To PC or AV Equipment. For Ethernet Link, use CAT5 cable
to connect to auxiliary equipment. The Ethernet Link LED
will light continuously when link is present and will flash
when there is link activity. Additional Ethernet network
equipment and cables provided by others.
12-24 V
Do not wire terminal 2 on Data Link when using
optional transformer. To power separately from
the Data Link, order the following Lutron
transformer model numbers:
RS232 Cable:
(15 m)
To PC or AV equipment:
Use a standard DB9
serial cable, or follow
the chart at right.
Data Link (to
Control Units,
processors, and
wallstations)
DIP Switches
to outlet (with optional transformer).
120 V : T120-15DC-9-BL
240 V : TE240-15DC-9-BL
240 V (UK): TU240-15DC-9-BL
RS232 Interface
Common
Receive
Transmit
DIP Switches
LED 1: Power
LED 2: Ethernet link
LED 3: Unused
LED 4: RS232 link TX
GRAFIK Eye and GRAFIK Systems Installation Instructions
®
1 2 3 4 5 6 7
LED 1: Power
LED 2: Ethernet link
LED 3, 4, 5: Unused
LED 6: Data link TX
LED 7: Data link RX
RS232 Pin Connect Wiring
Typical PC or Pin on
A/V equipment 9-pin cable
Com
TxD
RxD
1 2 3 4 5 6 7
LED 1: Power
LED 2, 3: Unused
LED 4: RS232 link TX
LED 5: RS232 link RX
LED 6: Data link TX
LED 7: Data link RX
1 2 3 4 5 6 7
LED 5: RS232 link RX
LED 6: Data link TX
LED 7: Data link RX
5
3
2
3