Ideal 350 Serie Manual De Instrucciones página 3

All manuals and user guides at all-guides.com
․ Remove the test leads from the circuit prior to
removing battery cap.
․ Do not attempt to repair this unit as it has no
userserviceable parts.
․ Voltages exceeding 30VAC or 60VDC pose a
shock hazard so use caution.
CAUTION
To protect yourself, think "Safety First":
․ Use appropriate personal protective equipment
such as safety glasses, face shields, insulating
gloves, insulating boots and/or insulating mats.
․ Before each use.
- Perform a continuity test by touching the test
leads together to verify the functionally of the
battery and test leads.
- Use the 3 Point Safety Method. (1) Verify
meter operation by measuring a known
voltage. (2) Apply meter to circuit under test.
(3) Return to the known live voltage again to
ensure proper operation.
․ Never ground yourself when taking electrical
measurements.
․ Connect the black common lead to ground or
neutral before applying the red test lead to
potential voltage. Disconnect the red test lead
from the voltage first.
․ Always work with a partner.
․ When using the probes, keep fingers as far
behind the probe tips as possible.
․ Never connect a source of voltage with the
function rotary switch in Ω/
position.Never set the meter in
to measure the voltage of a power supply
circuit in equipment that could result in
damage to the meter and the equipment
under test.
/ A //Hz
A function
3