Regalo Accents 0076 Manual Del Usuario página 4

STEP 3
Remove the hinge cover cap from the bottom
of the Home Accents Superwide Safety Gate™.
STEP 6
Take the wall mounts you removed in step 2
from the Home Accents Superwide Safety
Gate™ and add them to the end of the Home
Accents Extension Kit. Removal of the hinge
tube, follow step 2. Place the hinge knob on
the tube and re-install per instructions in step
5.
All manuals and user guides at all-guides.com
STEP 4
Place the extension gate of the Home Accents
Superwide Safety Gate™ on top of the Home
Accents Extension Gate.
Mounting of the Gate
STEP 1
Determine what side you wish to have the
hinge of the door on. Place the wall mounts on
that end of the gate against the wall. Using the
wood screws, screw into the wall. Turning the
a screwdriver in the clockwise direction will
tighten the screws. Repeat on both ends of the
gate.
NOTE:
If your application does not require
both extension gates, refer to Extension Gate
Installation
STEP 5
Place the tube with the hinge knob on it into
the hole in the bottom of the extension gate.
Slide the tube into place and screw the hinge
knob in the counter clockwise direction to
tighten.
STEP 2
Tighten all the gate hinges by twising the
hinge knob counter clockwise direction.