Hyper-Threading - EUROCOM D40EF IMPRESSA Manual Del Usuario

Hyper-Threading

You can enable (the default setting is "Disabled") Hyper Threading from the Advanced Menu in the BIOS Setup
Utility. Hyper-Threading is only supported in computers with a processor with Hyper-Threading Technology. If
you do not have a processor with Hyper-Threading Technology, this menu option will not appear.
PhoenixBIOS Setup Utility
Advanced Advanced
Advance Chipset Control
Hyper Threading
Chipset Information Menu
Embedded Share Memory
Graphics Aperture:
TV System
TV Scan MODE
Embedded Modem Device
Embedded Audio Device
Embedded 1394 Device
F1 Help Select Item -/+
Esc Exit Select Menu Enter
Hyper-Threading is only supported in Windows XP, so DO NOT enable this option if you are using Windows 2000.
If you have updated the Flash ROM BIOS from a previous version, which did not have the Hyper Threading option,
you must reinstall Windows XP after the BIOS update. Once you have enabled Hyper-Threading, DO NOT disable
the option or the computer may not startup (returning to the BIOS and enabling the option will correct this in case of
accidental disabling of the option). If you are changing the processor from a CPU which supports Hyper-Threading,
to one which does not, you will need to reinstall your OS.
All manuals and user guides at all-guides.com
Item Specific Help
Enables 2nd Logical
[D D isabled]
Processor.
This is applicable only
for Win XP
[32Mb]
[ 64 Mb]
[NTSC]
[UnderScan]
[Enabled]
[Enabled]
[Enabled]
Change Values F9 Setup Defaults
Select Sub-Menu F10 Save and Exit
Figure 12 - Advanced Menu (BIOS)
To Enable the Hyper Threading Option
1. To enter Setup, turn on the computer and press F2 during the
startup process.
2. Use the arrow keys to get to the Advanced menu >
Advanced Chipset Control, and to select the Hyper
Threading item.
3. Enable the Hyper Threading option.
4. Press F10 to save and exit the BIOS Setup.
Concise User's Guide
Hyper-Threading - 31