Local Time Setting - Police VD33 Guia De Inicio Rapido

Size: 170 x 55mm
Color: Blk
ADJUSTING DUAL TIME HANDS POSITION
* After setting or changing the battery, before setting the time, check if the dual time hour hand and dual
time minute hand are at the "0" (12 o'clock) position.
* If either the dual time hour hand or the dual time minute hand is not at the "0" position, reset it / them
following the procedure shown below :
1) Pull out the crown to second click (VD33) / first click (VD34)
2) Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the buttons.
* Dual time minute hand moves and returns to where it was
3) Press button A or B to reset the dual time hands to "0" position.
* Button A : dual time hour hand and dual time minute hand move counter-clockwise
Button B : dual time hour hand and dual time minute hand move clockwise
* The dual time hour hand moves correspondingly with the dual time minute hand
* The dual time hour hand and dual time minute hand move quickly if the respective buttons are kept
pressed.
4) Push the crown back in the normal position.
Note : The dual time minute hand rotates one revolution at every quarter (15 minutes). There is no
problem as it is typical function of the movement.
Size: 85 x 55mm
Color: Blk
DISPLAY AND CROWN / BUTTON OPERATION
Hour Hand
VD33
Dual Time Hour
Hand (12hr)
Second Hand
Dual Time
Minute Hand
Date Window 24 Hour Hand
Minute Hand
Hour Hand
Button A
VD34
1st click
Dual Time Hour
Hand (12hr)
Second Hand
Crown at
normal position
Dual Time Button B
Minute Hand
24 Hour Hand

LOCAL TIME SETTING

1) Pull out the crown to second click (VD33) / first click (VD34) when the second hand is at the 12 o'clock
position.
2) Turn the crown to set the hour and minute hands. (make sure 24 hour hand is set correctly).
3) Push the crown back in the normal position in accordance with a time signal.
Note :
* The 24 hour hand moves correspondingly with the hour hand.
* The moment the date changes is midnight. When setting the hour hand, make sure that AM/PM is
correctly set by using the 24 hour hand as an AM/PM indicator.
DUAL TIME SETTING
* When moving to a country or area in a different time zone, adjust the dual time hour hand to that country
/ area :
[ Quick set the dual time ]
1) Crown at normal position.
2) Adjust the time by pressing the button A or B.
Button A : - 1 hour / push
Button B : +1 hour / push
Minute Hand
Button A
1st click
2nd click
Crown at
normal position
Button B