RC260
5.1
Description of the device
Your cooler consists of the following parts (fig. 4, page 4):
No. in
Description
fig. 4
A
Lid
B
Handle
C
Container
D
Additional insulating lid
E
Control panel
F
Connection sockets (on the back of the lid)
G
Vents
H
ECO cooling capacity control
6
Operation
!
CAUTION! Health hazard!
Food may only be stored in its original packaging or in suitable
containers.
I
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygien-
ic reasons (please also refer to the "Cleaning and care" on
page 23).
A few water drops may form inside the cooler if it has been
cooling for a lengthy period. This is normal because the mois-
ture in the air condenses to water when the temperature in the
cooler falls. The cooler is not defective. Wipe it out with a dry
cloth if necessary.
EN
Operation
21