Techno Line WS 9490 Manual Del Usuario página 10

in few seconds. Then place your outdoor transmitter in a dry and shaded area.
Power On:
1. All segments are displayed on the display for 2 seconds.
2. The weather station searching starts wireless sensor via 433 MHz
3. If the outdoor temperature is not displayed after 3 minutes, hold the "
search for outdoor sensor. Then press the "TX" button on the sensor to send signal. If it still does not
receive the outdoor temperature, remove the batteries from the transmitter and go back to step 1 of the
set up
Display / Keys Details:
There are four function buttons:
1. Hold the "SET" button for 3 seconds to enter set mode.
2. 24h time display flashes, press the "
3. HOUR will appear. Press the "
button to adjust the hour.
4. Press the "SET" button to confirm and select the
minutes.
5. MINUTES will appear. Press the "
" MEM/ " button to adjust the minutes.
6. Press the "SET" button to confirm and select the
temperature unit.
7. TEMP °C will appear. Press the "
MEM/
" " button to select °F.
8. Press the "SET" button to confirm and exit.
WS 9490
" or "
CH/ MEM/
CH/ " or " MEM/ "
CH/ " or
CH/
" or
CH/Δ
" button on the main unit to
" button to change 12/24h time display.
GB 3