Set And Display Cost/Kwh / Display Metering Functions - brennenstuhl PM 231 Instrucciones De Uso

PM 231 E Operating instructions
GB
Press the UP button (4) to set the minutes (22) of the current
time and press the SET button (5) again to confirm the time.
Now connect the appliance and turn it on. The power
meter starts measuring the consumption.
5.4.2 Set and Display Cost/kWh / Display Metering
Functions
Set and Display Cost/kWh
If VOLTAGE / AMP / WATT appears on the display, press
and hold the FUNC button (6) for at least 1 second until
Cost/kWh (16) is shown. If already 2 prices were
entered these can be displayed in turn by pressing the
FUNC button (6).
Set Cost/kWh (Price 1)
Press and hold the SET button (5) until the fist digit flashes
to set the cost/kWh after the cost/kWh for price 1 (18) are
displayed. Set the correct value for the first digit with the
UP button (4). Now press the SET button (5) again until
the second digit flashes and set the correct value with the
UP button (4). Repeat the procedure for the third and the
fourth digit.
29
21518 BA_PM 231 DE 0454552.indd 29 05.04.18 14:41