Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Parameter description
Parameter value
Product name
Block splitter
Model
MSW-BSPL32
Blade length [mm]
320
Maximum cutting height [mm]
140
Minimum cutting height [mm]
29
Maximum brick surface [mm]
340×140
Table [mm]
285×340
Adjustment and service
Manual
Dimensions [mm]
1,170×307×1,223
Weight [kg]
33
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed and
manufactured in accordance with strict technical guidelines,
using state-of-the-art technologies and components.
Additionally, it is produced in compliance with the most
stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
Read instructions before use.
WARNING! or CAUTION! or REMEMBER! Applicable
to the given situation (general warning sign).
Wear protective goggles.
Wear protective gloves.
Wear foot protection.
ATTENTION! Hand crush hazard.
Keep the device level.
Mind the shards!
PLEASE BE CAREFUL! There is a risk of tripping.
PLEASE NOTE! The transport handle is part of the
set.
Keep the workpiece in the centre of the machine.
6
U S E R M A N U A L
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual product.
The original operation manual is written in German. Other
language versions are translations from the German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even
death.
The terms "device" or "product" are used in the warnings
and instructions to refer to "Block splitter".
2.1. SAFETY IN THE WORKPLACE
a)
Make sure the workplace is clean and well lit. A
messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use
common sense when working with the device.
b)
If you are unsure about whether the product is
operating correctly or if you find damage, please
contact the manufacturer's service centre.
c)
Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
d)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
e)
The device produces dust and debris during
operation. It is important to protect bystanders from
their harmful effects.
f)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
g)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
h)
Keep packaging elements and small assembly parts
in a place not available to children.
i)
Keep the device away from children and animals.
REMEMBER! When using the device, protect
children and other bystanders.
2.2. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
c)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
d)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
e)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
f)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
12.06.2019
2.3. SAFE DEVICE USE
a)
Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed better
and in a safer manner.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
g)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
h)
Do not move, adjust or rotate the device in the
course of work.
i)
Clean the device regularly to prevent stubborn grime
from accumulating.
j)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
k)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
l)
Do not overload the device.
m)
Keep your hands and feet away from blades during
maintenance operations.
n)
Work only with even surface elements. Elements with
uneven surfaces may crack too early or in places
different than intended.
o)
Do not work with elements with visible cracks on the
surface.
p)
Regularly check the blade sharpness.
q)
Before moving the device, make sure that there are
no heavy objects on the disc.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The stone cutter is designed for cutting cubes, slabs,
edging, curbs, clinker bricks, ceramic bricks, chamotte
bricks, stone.
The user is liable for any damage resulting from
unintended use of the device.
12.06.2019
3.1. DEVICE DESCRIPTION
1
2
6
10
7
4
8
5
3
9
1.
lever
2.
lever connector
3.
blocking foot
4.
blade level adjuster
5.
lower blade
6.
transport handle
7.
adjuster wheel
8.
upper blade
9.
wheels
10.
lever lock
3.2. PREPARING FOR USE
DEVICE LOCATION
The device should always be used when positioned on an
even, stable, clean, fireproof and dry surface, and be out of
the reach of children and persons with limited mental and
sensory functions.
ASSEMBLING THE DEVICE
2
1
3
4
1)
Screw the transport handle to the cutter frame.
2)
Fix the lever onto the lever joint.
3)
Screw the lever lock to the cutter frame and secure it.
4)
Tighten the cutter locking foot to the machine frame
with screws and stabilize it.
3.3. DEVICE USE
PLEASE NOTE! Before cleaning or adjusting, move the lever
to the lowest position.
a)
Position the top blade parallel to the flat surface of
the workpiece.
7
Publicidad
