To Delete Saved Data - Casio CDP-200R Guia Del Usuario

CDP200R_e.book 43 ページ ２００８年４月２１日 月曜日 午後３時４分
11-1.
cl
Press the (10-key) [–] key to exit without
saving.
This displays the delete confirmation message.
cl
Press the (10-key) [+] key to exit the editing procedure.
11-2.
cl
Press the (10-key) [+] key to save the data.
F u n k
cl
• Use (10-key) [–] and [+] keys to select the rhythm
number you want to save.
• You can edit the user rhythm name. Use the
key) [4] (u) and [6] (i) keys to move the cursor to the
character you want to change, and then use [+] and [–]
to change the character.
12.
cl
Press (10-key) [7] (ENTER) key.
This will display a message asking if you want to save the
user rhythm.
cl
• Press the (10-key) [+] key to save the data.
cl
• Press the (10-key) [–] key to return to the screen
that was displayed before you pressed [7] (ENTER)
key.
• If you select a user rhythm number that already
contains data, the existing data will be replaced by the
new data.
• You cannot change the tone assigned to the keyboard
while an Auto Accompaniment editing (rhythm edit)
operation is in progress.
All manuals and user guides at all-guides.com
The following procedure cannot be performed while an Auto
Accompaniment editing (rhythm edit) operation is in progress.
1.
8 B t
cl
(10-
2.
3.
4.
5.
6.
■ Saving User Rhythm Data on an External Device
• SD memory card (page E-58)
• Computer (page E-65)
Editing Auto Accompaniment Patterns

To delete saved data

7
Press and then use the
and [6] (i) keys to display "DELETE" (page
E-6).
Flashes
D E L E T E
Used memory (Unit: Kbytes)
Remaining memory capacity
cl
Press the (10-key) [7] (ENTER) key.
cl
Press the (10-key) [6] (i) key.
User rhythm name
U s e 1
cl
Use the (10-key) [–] and [+] keys to select the
user rhythm you want to delete.
cl
Press the (10-key) [7] (ENTER) key.
This displays a delete confirmation message.
S u r e ?
cl
Press the (10-key) [+] (YES) key.
After the delete procedure is complete, "Complete" will
appear followed by the screen in step 2 of the above
procedure.
• To cancel the delete operation, press [–] (NO) or [9]
(EXIT) in place of [+] (YES).
cl
(10-key) [4] (u)
E-43