Operating The Expandview ™ Cat5; Adjusting The Picture Quality - Belkin ExpandView CAT5 Guía De Instalación Rápida

All manuals and user guides at all-guides.com
CONFIGURATION
10. Operating the ExpandView CAT5
™
Once connected, the ExpandView CAT5 broadcasts to all remote monitors.
™
The Control Unit
The Control Unit is illustrated below
To Broadcaster's
Control port
With the ExpandView CAT5 Control Unit carry out the following functions:
™
Master to all
Press the Master to all button to send the broadcaster's screen
to all remote monitors. The LED above the button lights up.
Press the button again to release the remote monitors.
Dark all
Press the Dark all button to darken all remote screens.
The LED above the button lights up.
Press the button again to release the remote screens.

11. Adjusting the picture quality

Use a small screwdriver to turn the Picture adjuster on the Remote module to
adjust the picture quality.
10
P75110ea_F1DV108Aea_QIG.indb 10 25/1/06 9:06:09 am