Amano PIX-10 Manual De Operación página 12

All manuals and user guides at all-guides.com
Normal Program Mode
These instructions must be followed in the order given.
1. Understanding the Front Panel
LCD Display Window
2. Plug In the Power Cord
Note: To exit the programming mode
and return to the time display, press
the RESET button at any time.
3. Entering the Normal Program Mode
The following steps describe how to get into the Normal Program mode.
Note: The password is printed inside the top of the cover case: "
1. Press and hold down the RESET button.
2. While holding down the RESET button, press and hold down
the ENTER button.
3. While holding down the ENTER button, release the RESET
button.
4. When Pro9 flashes in the display, release the ENTER button.
5. Press the ENTER button again.
6. Press the CHANGE button until the
position, then press the ENTER button.
7. Press the CHANGE button until the
second position, then press the ENTER button.
8. Press the CHANGE button until the
position, then press the ENTER button.
9. Press the CHANGE button until the
position, then press the ENTER button.
10. When the display flashes
Print / Change Button
The RESET Button is
located in the lower right
corner on the bottom of the
clock.
8 appears in the first
appears in the
0
appears in the third
8
appears in the fourth
8
, press the ENTER button.
8088
Page 9
Print / Enter Button
.
8088"
P r o 9
0 0 0 0 0
8 0 0 0 0
8 0 0 0 0
8 0 8 8 0
8 0 8 8 8
PIX-10