PROGRAMMED PLAY
Up to 30 tracks can be programmed from the disc.
1
In stop mode, keep s STOP/MEMORY *
pressed until "M" flashes in the display.
* or s STOP on the remote control
2
Press r or t to select a track, then
press s STOP/MEMORY to store it.
Track number
Pressing the numbered buttons 0-9 and +10 on the
remote control selects and stores the track at the
same time.
3
Repeat step 2 to program other tracks.
4
Keep s STOP/MEMORY pressed until
"M" stops flashing to finish the program.
"M" remains displayed and indicates the unit stores
the programmed tracks.
5
Press A to start play.
To check the program, press r or t in stop
mode.
To clear the program, press s once in stop mode so
that "M" disappears in the display.
To change the programmed tracks, clear the
program and repeat all the steps again.
All manuals and user guides at all-guides.com
Program number
SETTING THE SLEEP TIMER
The unit can be turned off automatically at a
specified time.
1
Keep REPEAT/FM MODE/OSC/SLEEP
pressed until "30" flashes in the
display.
2
Within 4 seconds, press r or t to
specify the time until the power is
turned off.
Each time it is pressed, the time changes
between 10 and 90 minutes in 10-minute steps.
To check the time remaining until the power
is turned off
Repeat step 1 shown above. The remaining time is
displayed for 4 seconds.
To cancel the sleep timer
Display the remaining time and press r or t
repeatedly until OFF is displayed.
NOTE
If the unit is turned off during tape playback, c on
the deck will not be released. Press Z to
release c.
Music discs encoded with copyright protection
technologies
This product is designed to playback discs that conform
to the Compact Disc (CD) standard.
Recently, various music discs encoded with copyright
protection technologies are marketed by some record
companies. Please be aware that among those
discs, there are some that do not conform to the CD
standard and may not be playable by this product.
Specified time
While the sleep
timer works, the
dot keeps flashing.
9
ENGLISH