interion 695739 Instrucciones De Ensamblaje página 2

2
H2
H1
H5
H5
3
Interion Training Tables
B
Using enclosed 4mm Allen wrench (H6), attach modesty panel (B) to legs with 4
socket screws (H5). If you want the modesty panel to be seen, then make sure
that the cable channel is facing away from the elongated part of the leg as shown
in Fig. B. If you want it to be hidden, then face it in the direction of the elongated
part of the leg. Attach 2 locking casters (H1) to the front part of the legs and 2
non-locking casters (H2) to the rear part of the legs as shown. Tighten with
enclosed double sided wrench (H8).
H2
H1
H5
Cable
H5
Channel
Grasp the lever on either side of the
tabletop and depress to release lock and
lift tabletop until it locks in the upright
position. To lower tabletop, depress lever
to release lock and gently lower tabletop
until it locks in the down position.
2
Assembly Instructions
Figure B
Leg