Uline DIGI-DAY S-21780 Manual Del Usuario página 2

STEP 3
SET THE NUMBER OF COUNT DAYS
• Press COUNT DAYS button. First segment number will
flash.
• Press remote's numbered buttons to enter desired
number of days. As each number is entered, the
next segment will flash. After entering numbers, press
ENTER button.
Count Up mode shown above.
EXAMPLE: 357 days – Press COUNT DAYS button. Enter
numbers 0-3-5-7 for number of count days. Press ENTER
button.
NOTE: The leading zero(s) will not appear
during operation.
STEP 4
SET COUNT DAY TO CHANGE TO GREEN
• Press GREEN DAY button. First segment number will
flash.
• Press numbered buttons to enter desired number
count day to turn green (and subsequent numbers
will always be green). As each number is entered,
the next segment will flash.
• After entering numbers, press the green ENTER
button.
EXAMPLE: For 10 days, Press GREEN DAY button. Enter
0-0-1-0 for number of count days to change to green.
Press ENTER button.
NOTE: Count Day(s) less than this number will be
red.
NOTE: In this example, Count
Day 1 through 9 will display
in red. On Count Day 10 and
beyond the display will be in green.
PAGE 2 OF 9
OPERATION CONTINUED
Count Down mode shown above.
STEP 5
SET THE "ACTUAL TIME" OF DAY
• Press ACTUAL TIME button. Colon dots appear and
first segment number will flash. Display operates on
a 12-hour clock.
• Press ACTUAL TIME button again to select AM and
PM – bottom center LED indicator is green for AM
and red for PM.
• Press remote's numbered buttons to enter desired
time. As each number is entered, the next segment
will flash. After entering time, press ENTER button.
EXAMPLE: 9:15 AM time – press ACTUAL TIME button to
turn LED indicator at the bottom center to be green,
then enter numbers 0-9-1-5 for for actual time of day.
Press ENTER button.
NOTE: During operation, when it is PM, the
bottom center LED indicator will be red.
STEP 6
SET THE TIME FOR NUMBER OF COUNT DAYS TO
CHANGE
• Press COUNT TIME button. Top colon dot appears
and first segment number will flash. Display operates
on a 12-hour clock.
• Press COUNT TIME button again to select AM and
PM – bottom center LED indicator is green for AM
and red for PM.
• Press remote's numbered buttons to enter desired
time. As each number is entered, the next segment
will flash. After entering time, press ENTER button.
EXAMPLE: 11:59 PM time – press COUNT TIME button to
turn LED indicator at the bottom center to be red, then
enter numbers 1-1-5-9 for time for number of count days
to change. Press ENTER button.
0621 IS-21780