T'nB BTADA2IN1 Manual página 7

Congratulations on your purchase and thank you for the
EN
confidence you have shown in T'nB. Our products comply
with the regulations and standards currently in force. Be-
fore using this device we recommend that you read the ins-
tructions and safety advice carefully and retain this manual.
IMPORTANT SAFETY INSTRUCTIONS
• The power supply of your accessory/device must match with
the provided original features.
• Please check beforehand that your accessory/device is compa-
tible with the device that is being used.
• Do not use your accessory/device in the rain, in the damp
places or near the water.
• Do not place any flammable objects, any explosive substances
or any dangerous objects near your device.
• Only use the supplied accessories and connectors. The use of
any other type of accessory that is not intended for this purpose
may damage your device irreversibly.
• Use and store your device only in an environment where the
temperature is between 0°C and 45°C.
• Keep your device out of the reach of children.
• Do not disassemble your accessory/device and do not attempt
to repair it by yourself.
• Do not use your accessory/device if it has been subjected to the
shock of impact or damage.
• To avoid any risk of electrocution, unplug your accessory/device
from the main power supply and all appliances before cleaning it
or if you do not use it.
• T'nB accepts no liability for the misuse of the product or the use
with a device that has incompatible electrical features.
DESCRIPTION
1. Multi-function key
2. Receiver jack port (RX)
3. Transmitter jack port (TX)
4. Blue indicator light
5. Red indicator light
SPECIFICATIONS
Charging voltage
Battery capacity
Charging time
Battery life
Charging connector
Bluetooth® version
Protocol
Range
Jack connectors
Charging connector
Connectivity
CHARGING
BTADA2IN1 is equipped with a rechargeable battery. It is recom-
mended to charge the battery fully before using the device for
the first time.
Use the micro USB cable (10) provided. Insert the micro USB
connector into the micro USB port (6) and then connect it to a
main USB charger or a PC USB port. The indicator light (7) will
remain red when charging. When the battery is fully charged, the
indicator light (7) will turn blue.
It is possible to use BTADA2IN1 when it is charging.
The indicator light flashes (7) when the battery is low.
SWITCHING ON
ON: Press (1), (4) flashes.
OFF: Press (1) for 3 seconds, (4) goes off.
BTADA2IN1 will switch to standby mode after 5 minutes of
inactivity.
To reset BTADA2IN1, press and hold (1).
INSTALLATION
Receiver mode: to stream wireless audio content from your
tablet or smartphone to a Hi-Fi stereo, TV, car radio, etc.
A) Insert the 3.5 mm jack cable (8) into the jack port (RX) (2)
of BTADA2IN1 and connect the other connector to the female
jack port of the RCA cable (9) provided, then connect it to your
equipment (or connect the jack cable directly if your equipment
has a 3.5 mm jack input).
B) Turn on BTADA2IN1 by pressing (1). The blue indicator light
(4) will flash rapidly. The red indicator light (5) will then flash
alternately with the blue light (4).
C) In the settings of your smartphone or tablet, activate the
Bluetooth® function, search for the BTADA2IN1 device and select
it to connect. Once paired with your smartphone or tablet, you
will hear a beep on your audio equipment and the blue indicator
light (4) will flash slowly. You can now stream your audio content.
D) To simultaneously connect a second device (smartphone,
tablet, etc.), repeat the last operation C). You can connect up to 2
devices in receiver mode.
Transmitter mode: to stream audio tracks from a TV, Hi-Fi stereo,
etc., to a wireless Bluetooth headphone or Bluetooth® speaker.
A) Insert the 3.5 mm jack cable (8) into the jack port (TX) (3), then
connect the other connector to your TV, Hi-Fi stereo, etc., through
the 3.5 mm jack port (headphone output).
B) Turn on BTADA2IN1 by pressing (1). The blue indicator light will
flash rapidly (4).
C) Turn on your Bluetooth® headset or speaker, and then press (1)
to pair your device with BTADA2IN1. Make sure that the distance
between BTADA2IN1 and your headphones or speaker is less than
10 meters. Once the headphones or speaker are paired with your
TV or Hi-Fi stereo, you will hear a beep in your headphones or
speaker and the blue indicator light (4) will flash slowly. You can
stream the audio content.
D) Repeat the last operation C) to connect a second pair of
headphones/speaker simultaneously. You can connect up to 2
devices in transmitter mode.
NOTES
The connection may be different depending on the Bluetooth®
protocols. In case of trouble connecting, please refer to the user
manual of your Bluetooth® device.
If the connection fails, please turn off BTADA2IN1 and restart.
If BTADA2IN1 does not work properly:
- Make sure the product is switched on.
- Check if the battery is charged.
- Turn off and reset BTADA2IN1.
- Check that the jack cable is connected to the correct port (RX) or
(TX) according to the desired use.
- Make sure that the distance between BTADA2IN1 and your
Bluetooth® device is less than 10 meters.
notice-BTADA2IN1.indd 7
6. Micro USB charging port
7. Battery level
8. 3.5/3.5 mm jack cable
9. RCA/3.5 mm female jack cable
10. USB/micro USB cable
5 V
160 mAh
2 h
5 h
Micro USB
4.1
A2DP, AVRCP
10 meters
3.5 mm x 2
Micro USB
Multi-connection up to 2
Bluetooth® devices
16/05/2018 16:46