GB
Troubleshooting
Before performing any maintenance or cleaning work, always pull out the mains plug
!
and wait until the cutter has come to a standstill.
Fault
Motor does not run
Motor output drops
Vibration / noises
Blade roller does not rotate V-belt (toothed belt) torn
Available accessories
Grass deflector
Recommended for mowing without a grass
catcher, included in the scope of delivery
depending on the model.
GB 7
Remedial action
Check mains connection wire and automatic cut-out (fuse).
Start on low grass or a section which has already been cut.
Clean the housing – the rotating blade roller must rotate freely.
Correct cutting height – clean housing
Check / re-grind blades
V-belt (toothed belt) damaged
after-sales workshop
install new V-belt
after-sales workshop
install new V-belt
after-sales workshop
Assembly, grass deflector