Thermal Motor Protection; For Best Results - Braun PowerBlend 9 Manual Del Usuario

Duration depends on how long you press the
START/STOP button (Fig. D).
(E) Using the Double Function
Measuring Cap
During operation use the measuring cap (1)
to slowly add oil through the dripping hole to
emulsify sauces and dressings (Fig. E.a) or
easily add small amounts of liquids (Fig. E.b).
(F) Using the Tamper
It helps to push unmixed ingredients down from
the jug wall and to bring thick mixtures into the
blades while blending. The supplied tamper (12)
will not touch the blade when used through the
opening of the measuring cap (1) (Fig. F).
Note: It must be used only when the main part
of the lid is in place.
(G) Blending with the Smoothie2Go
Bottle
(optionally available)
The Smoothie2Go blending set (13,14,15) can
be purchased in stores, through the Braun
Household website, or by calling Customer
Service.
Note: When using the Smoothie2Go bottle the
programs smoothie and ice crush are avai-
lable for use. The Smoothie2Go bottle must
not be used to blend hot foods or carbonated
liquids. To avoid damage, do not fill the contai-
ner past the "max" marking.
When preparing protein shakes or drinks with
alcohol, do not fill beyond max. 400 ml.
For detailed processing instructions refer to
table II.
Auto Off
The appliance assembled with the jug (2) stops
blending automatically after 6 minutes proces-
sing time in manual mode and assembled with
the Smoothie2Go bottle (13) after 2 minutes.
To re-start operation, press START/STOP (5).
16
Stand-By
If no speed or mode is selected the appliance
enters into stand-by mode automatically after
2 minutes and all indicator lights are switched
off, only the timer (7) is dimmed and shows
„--:--. To re-activate the blender press any
button or move the dial (5).

Thermal Motor Protection

The blender is equipped with a thermal protec-
tor which protects the motor from overheating. If
the motor shuts down during operation, unplug
the blender and let it cool down for a minimum
of 30 minutes before continuing blending.

For Best Results

• If blending action stops during blending there
may be not enough liquid to blend efficiently.
Add some more liquid or insert the tamper
and stir slowly.
• For preparing small amounts of food use a
low speed level.
• When chopping nuts, cheese and meat we
recommend running the selected program/
texture twice to achieve desired results.
• When chopping vegetables, we recommend
adding a small amount of water to improve
the circulation. After finishing, strain your
chopped ingredients.
• Fill the jug in the following order: Liquids, dry
goods, leafy greens, soft ingredients, hard or
frozen ingredients, ice cubes. Fill the ingre-
dients in the reverse order into the Smoot-
hie2Go bottle.
• If blending in manual mode, always start on
speed 1 and slowly increase to the desired
speed.
• When chopping solid ingredients (such as
parmesan, chocolate or meat) cut them up
into small pieces (3 cm).
(H) Care and Cleaning
We recommend cleaning the jug by using the
CLEAN program to prolong its lifetime. The
program will automatically stop once it com-
pletes the cycle.