Magnavox MPC220 Guía Rápida De Uso

MPC220-QUG 7/18/03 5:28 AM Page 1
Quick Use
Quick Use
Guide
Guide
1
Insert the batteries.
a Press the OPEN3 slider to
open the lid.
b Open the battery compartment
and insert 2 AA batteries.
2
Insert a CD.
Place a CD on the hub and
close the lid. Make sure the
disc is in good condition and
the label is facing up.
3
Connect the Headphones.
Plug the headphones into the
LINE OUT/; jack.
4
Start playback.
a Press PLAY to start the
CD.
b Use the VOL to adjust the
volume.
!
NOTE:
If the buttons do not respond,
check the RESUME/HOLD/OFF
slider. It should be in RESUME
position to begin with.
See the other side for some important tips.
All manuals and user guides at all-guides.com
1a
1b
2
4a
!
3
4b
MODE button
Press to select the Play
mode (Shuffle, Shuffle
Repeat, Shuffle Repeat
ALL, Repeat, Repeat, and
Repeat ALL).
STOP 7 Button
Press to stop playback,
clear a program, or
switch the player off.
PLAY 38 Button
Press to switch the play
on or to begin playback.
RESUME
Switch to store the last
position of a CD track
played.
HOLD
Switch to lock the but-
tons
OFF
Switch to turn off
RESUME and HOLD.
LINE OUT/;
Connect headphones or
another audio device
here.
VOL
Use to adjust the vol-
ume.
4.5V DC
Connect jack for exter-
nal power supply here.
!
If the Disc does not play, there are several possible reasons.
If "NO DISC" is displayed:
1 The CD might be dirty or scratched.
2 The label might be facing down.
3 The lens might be fogged up. Allow sever-
al minutes for it to clear.
Quick Use
Quick Use
Guide
Guide
Display
PROG
Press to program
tracks
DBB
Press to turn Bas-
Enhancement on and
off.
Search ¢
Press to search and
skip forward.
Search 4
Press to search and
skip backward.
OPEN 3
Slide to open the CD
player lid.
If "NF DISC' is displayed:
1 The disc is not being recognized by the
CD player.
2 The CD-RW (or CD-R) needs to be final-
ized before the player can play it.