SEA 23120570 Guía De Programación página 2

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
Specifications:
1. Current: 12V/24V AC/DC
2. Frequency: 433.92 MHz
3. Keelog rolling code
4. 2 channels
5. Maximum memory capacity: 400 codes
When the input voltage is 24V, it is necessary to bridge over 24V (12V standard programming).
Programming:
1. Storing a transmitter code:
Press "learn1" or "learn2" for 1 second, the "learn led" light switches on, then press the desired button on the
transmitter until the "learn led" light flashes and stops. At this point the transmitter code has been stored.
- Repeat the above described steps for further transmitters.
2. Removing a transmitter code: press "learn1" or "learn2" and hold until the "learn led" light stops, all stored
transmitter codes will be so deleted.
®
SEA S.p.A
DIREZIONE E STABILIMENTO:
Zona industriale 64020 S.ATTO Teramo - (ITALY)
Tel. 0861 588341 r.a. Fax 0861 588344
2Ch. EXTERNAL RECEIVER
(Cod.23120570)
ANT.
http://www.seateam.com
e-mail:seacom@seateam.com (Ufficio Commerciale)
Channel1 Channel2
Learn1 Learn2
Learn_Led
X X
12V
Jumper
24V
Power_Led
CH1 CH2 V - GND
12V/24V
AC/DC
CH1 CH2 0V
(N.O.) (N.O.)
Rev.00 - 02/2015
seatec@rgn.it (Ufficio Tecnico)
X X
English