Gas Conversion - Jocel JP3GV009029 Manual De Instruciones

GAS CONVERSION

Important
The replacement/conversion and adjustments of the gas hob should only be undertaken
by a Qualified Technician.
Please check the note on the appliance. But it can be converted from one gas category to
another, make sure the injectors (provided) are fitted and the gas rate is adjusted to suit.
Method
⚫ Ensure that the gas taps are in the "OFF" position
⚫ Isolate the hob from the electrical supply
⚫ Remove all pan supports, burner caps, rings, crowns and control knobs
⚫ With the aid of a 7mm box spanner the burner injectors can then be unscrewed and
replaced by the appropriate injectors (not supplied).
To adjust the gas rate
With the aid of a thin bladed screwdriver completely tighten down by the pass adjustment
screw, which is located down the center of the gas tap control shaft. Upon completion stick
the replacement rating plate on the underside of the hob.
- 31-