Attaching Interface Plate And Center Plate - peerless-AV CM50 Manual Del Usuario

Attaching Interface Plate
Attach interface plate (A) to wall plate (B) using two sets of 1/4-20 x 1" round phillips head screws (G),
2
1/4" fl at washers (J) and 1/4-20 fl anged serrated locknuts (H) as shown in fi g 2.1 or 2.2 for interior corners
or fi g 2.3 or 2.4 for exterior corners. Repeat for opposite interface plate.
NOTE: Be sure top flange of interface plate (A) rests on top flange of wall plate (B).
NOTE: Do not fully tighten fasteners.
LEFT INTERIOR CORNER
A
fig. 2.1
LEFT EXTERIOR CORNER
B
All manuals and user guides at all-guides.com
G
J
H
B
G
J
H
A
fig. 2.3
RIGHT INTERIOR CORNER
B
RIGHT EXTERIOR CORNER
A
8 of 30 ISSUED: 07-22-08 SHEET #: 120-9054-2 09-30-11
G
J
H
fig. 2.2
G
J
H
B
fig. 2.4
A