Publicidad
WIEGAND Connection/ Connexion/ Connessione/ Conexión/ Anschluss/ Aansluiting
DIPSWITCH configuration/ Configuration de Dipswitch/ Configurazione Dipswitch/
Configuración del Dipswitch/ Dipswitch Konfiguration/ Dipswitchconfiguratie
Dipswitch
Function
1
Backlight ON/OFF
2
Buzzer ON/OFF
Convert
W 26bit
UID
3
ON
YES
3
OFF
NO
Note: The conversion from 7byte ID to 4 byte ID is only possible with cards that have 7 byte ID Number. Those are: Mifare plus,
Desfire and Ultralight.
Wiegand selection
Jumper
W 26bit
4
Wiegand 1
OFF
5
Wiegand 2
OFF
6
No Parity
OFF
Use the Dipswitchs no: 4, 5 and 6 to select the desired Wiegand Output
Utiliser les Dipswitch n° : 4, 5 et 6 pour sélectionner la sortie Wiegand souhaitée
Usa Dipswitch n.: 4, 5 e 6 per selezionare l'uscita Wiegand desiderata
Utilice el Dipswitch DIP número: 4, 5 y 6 para seleccionar la salida Wiegand deseada
Benützen Sie den Dipswitch 4, 5 oder 6 um das gewünschte Wiegand Output zu wählen
Gebruik Dipswitch nr. 4, 5 en 6 voor de selectie van de gewenste Wiegand-uitgang
Note: All changes can be made live, without power cycling.
Tricolor LED/ Témoin tricolore/ LED tricolore/ LED tricolor/ Dreifarbige LED/ Driekleurige LED
Orange(Idle Mode): LG- and LR- not connected
Orange (Mode veille): LG- et LR- ne sont pas connectés
Arancione: "LG-"(filo verde) e "LR-"(filo arancione) non collegati
Naranja (Modo reposo): LG- y LR- no están conectados
Orange (Standby): LG- (grünes Kabel) und LR- (orangefarbenes Kabel) sind nicht mit Masse verbunden
Oranje ( vrije stand ): draden LG en LR zijn niet aangesloten.
Green: LG-(green wire) connected to GND
Vert: LG- (câble vert) connecté à GND
Verde: "LG-"(filo verde) collegato a GND
Verde: LG- (cable verde) conectado a GND
Grün: LG- (grünes Kabel) ist mit der Masse verbunden
Groen: LG- ( groene draad ) verbonden met massa.
Red: LR-(orange wire) connected to GND
Rouge: LR-(câble orange) connecté à GND
Rosso: "LR-"(filo arancione) collegato a GND
Rojo: LR-(cable naranja) conectado a GND
Rot: LR- (orangefarbenes Kabel) ist mit der Masse verbunden
Rood: LR- ( rode draad ) verbonden met massa.
No light: LG-(green wire) and LR-(orange wire) connected to GND
Sans lumière: LG-(câble vert) et LR-(câble orange) connectés à GND
Nessuna luce: "LG-"(filo verde) e "LR-"(filo arancione) collegati a GND
Sin luz: LG-(cable verde) y LR-(cable naranja) conectado a GND
LED aus: LG- (grünes Kabel) und LR- (orangefarbenes Kabel) sind mit der Masse verbunden
Geen verlichting: LG- (groene draad ) en LR ( oranje draad ) verbonden met massa
All manuals and user guides at all-guides.com
Led Green -
Led Red -
GND
12 VDC
D0
D1
W 34bit
W 42bit
W 58bit
YES
NO
NO
NO
NO
NO
W 34bit
W 42bit
W 58bit
ON
OFF
ON
OFF
ON
ON
OFF
OFF
OFF
max. 50m
1.Backlight ON/OFF
2.Buzzer ON/OFF
3. Convert UID
4.W1-Wiegand1
5.W2-Wiegand2
6.No Parity
(OFF=Send Parity) (ON=No Parity)
W 24bit
W 32bit
W 40bit
NO
NO
NO
NO
NO
NO
W 24bit
W 32bit
W 40bit
OFF
ON
OFF
OFF
OFF
ON
ON
ON
ON
LG-
LR-
LG-
LR-
LG-
LR-
LG-
LR-
C18
C6
EWS
W 56bit
NO
NO
W 56bit
ON
1
2
3
4
ON
ON
Default: Wiegand 26bit
gnd
gnd
gnd
gnd
ON
5
6
3
Publicidad
