VACUUM INSULATED STAINLESS STEEL FOOD JAR
GENERAL CARE
- Before first use, and as soon as possible after each use, wash all parts with warm, soapy water. Rinse all parts
thoroughly and allow time to dry.
- Contents should not be left in the container for longer than 24 hours. As soon as possible after each and every use,
wash all parts with warm, soapy water. Rinse all parts thoroughly with clean water. Allow all parts to dry completely
prior to next use or storage.
- DO NOT use abrasive cleaners or scrubbers since they may dull the finish.
- DO NOT use bleach or cleaners containing chlorine on any parts of the product.
- This product is top-rack dishwasher safe; however, washing by hand is recommended as the dishwasher uses harsher
detergents and hot water that may affect the appearance of your product.
- Residual liquids, foods, or other contents may become trapped between product components, such as lid parts,
container parts, gaskets (flexible band around lid and/or stopper), or straws (if present in the product). Although this
product is top-rack dishwasher safe, washing by hand is recommended to ensure that all parts of the product are
thoroughly cleaned.
- For maximum thermal efficiency, preheat or pre-chill the product just prior to use. Fill with hot/cold tap water,
attach lid, let stand 5 to 10 minutes and empty water. After filling container with contents, re-cover with lid to
increase thermal efficiency. Never use a microwave, conventional oven, or other heat source for this purpose.
ASSEMBLY AND USE
SOLID-TOP LID (IF PRESENT):
1. Remove lid (A) by twisting counterclockwise.
2. Remove gasket (B) from underside of lid (A).
3. Wash all parts separately, then re-assemble.
a. Ensure gasket (B) is properly seated to minimize leaking.
4. Fill container (C) with contents. Do not overfill: Leave space for lid (A),
to avoid overflow.
5. Replace lid (A) by twisting clockwise.
STOPPER W/ LID (IF PRESENT):
1. Remove lid (D) by twisting counterclockwise.
2. Remove spoon (F) (if present) by pulling up on it.
3. Open container (G) by twisting stopper (E) counterclockwise.
4. Remove gasket (H) from underside of stopper (E).
CARE AND USE GUIDE
* Image for reference only: actual product may vary
D
A
B
G
C
F
E
H