Rampage ACD-18 Manual Del Propietário página 10

All manuals and user guides at all-guides.com
If a problem should develop while operating the CD player, the error code nocd may
appear on the display panel. This can indicate a number of problems with the unit,
including a mechanical error or an error in the microprocessor control of the player. If
the error code should appear, try ejecting and re-loading the disc into the player. Make
sure the disc is clean, undamaged, and loaded correctly (label side up). If the problem
remains, try another disc to make sure the one you are using is not damaged.
If the suggested measures do not solve the problem, contact an approved warranty
station near you for further assistance.
Size:
Operating Voltage:
Fuse Ratings:
Output Power:
Output Wiring:
Output Impedance:
Tuning Range:
Sensitivity:
FM Stereo Separation:
CD Frequency Response: 20 – 20,000 Hz. ±1 dB
CD Signal/Noise Ratio:
CD Channel Separation:
CD Distortion:
9 9 9 9 9
ERR ERR OR CODE OR CODE
ERR ERROR CODE ERR OR CODE OR CODE
SPECIFICATIONS SPECIFICATIONS
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS
7" W x
178 mm x 50 mm x 155 mm
12 volts DC, negative ground
Constant (yellow) lead: 5 AMP.
Switched (red) lead: 0.5 AMP.
Power Antenna (blue) lead: 0.5 AMP.
50 watts maximum
(25 watts x 2 channels)
Floating-ground type designed for 2 speaker use.
May also be used with 4 speakers.
Compatible with 4-8 ohm speakers.
AM: 530 – 1,720 KHz.
FM: 87.5 – 107.9 MHz.
AM: 20 uv.
FM: 1.5 uv.
30 dB
70 dB
60 dB
0.2%
*Specifications are subject to change without notice.
2" H x 6-1/8" D