Control Descriptions; Recommendations For Use - Fimar EasyLine PFD/27 Manual De Uso Y Mantenimiento

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ INDUCTION PLATES

CONTROL DESCRIPTIONS

The appliance is equipped with the
listed control devices, required to
run its main functions.
A) Button: used to turn the appli-
ance on and off.
B) Indicator light: when on, it means
the cutting blade is on.
C) Display: used to display set pa-
rameters (power, temperature
and time).
D) Button: used to set appliance op-
erating mode (power mode or
temperature mode)
E) Button: used to set processing
EN
time.
F) Button: used to increase the val-
ue of the selected parameter.
The value of the selected param-
eter increases each time the but-
ton is pressed.
G) Button: used to decrease the value of the selected parameter.
The value of the selected parameter decreases each time the button is pressed.
H) Indicator light: when on it indicates that the parameter on the display is processing pow-
er.
L) Indicator light: when on it indicates that the parameter on the display is processing tem-
perature.
M) Indicator light: when on it indicates that the parameter on the display is processing time.
N) Main power switch: used to turn appliance power on and off.

RECOMMENDATIONS FOR USE

1. Based on the type of process (defrost, cook, heat, etc.) suitably prepare food product
and place it in an appropriate container.
2. Place the container on the centre of the cook plate.
3. Press the button (A) to start the appliance.
N
PFD/35
C
E
G
- 10 -
H L
M D
F
English language
B
A