CESVA LF010 Guía Rápida página 5

LF010
QUICK GUIDE TO THE WEBSERVER OF THE LF010 LIMITER
G_LF010_v0003_20190517_EN
Sound level limiter
Spectrum analyser and register by 1/3 octave band
DIRECT MODE ACTIVATION
Access to the webserver is done with an external device that has a
web browser: desktop or laptop computer, tablet, smartphone, etc.
The first access to the webserver must be done by activating the
"Direct mode" of the limiter, to do this:
Access the "Main Menu"

Press the "Direct Mode" icon

The LF010 activates the direct mode of communication by generat-

ing a WIFI wireless communication.
Communication ends when you exit the "Direct Mode" by pressing
or after 60 minutes of inactivity.
To communicate the desired device (PC, tablet, smartphone ...) with
the LF010 limiter follow the next steps:
Search for WIFI networks with the device you want to connect to the

LF010 limiter.
Select the WIFI network that generates the LF010 limiter; The name

of the WIFI network is displayed on the LF010 "Direct mode" screen.
Connect the device to the WIFI network (no password required). If

the operating system reports that this network does not allow access
to the Internet, indicate that you want to maintain the connection.
Finally open an Internet browser and write in the address bar the IP

address (WIFI) shown on the LF010 "Direct mode" screen or enter
"lf010.info".
WEBSERVER LOGIN
The webserver login screen will appear where you must choose
whether you access as "User", as "Installer" or as "Inspector".
The initial password for "User" and "Installer accesses is "admin".
This can be modified later (consult the manual in the SUPPORT op-
tion of the webserver). For "Inspector" access, no password is re-
quired.
on the LF010 touch screen.
in the main menu.
Maracaibo, 6 T. (34) 934 335 240
08030 Barcelona (Spain) F. (34) 933.479.310
info@cesva.com
www.cesva.com
EN