EN
Carrycot
To mount the carrycot, place the adapters into
the adapter pockets, located on the frame's
inner side (Fig. 17). The carrycot adapters are
blocked automatically. To take the carrycot off,
press the memory adaptor buttons and lift it up
(Fig. 17). If necessary, the internal part of the
carrycot can be removed and washed. To do so,
you should take out the coconut mattress and
remove the coating by opening the two zippers
and fasteners (Fig. 18).
The carrycot is also equipped with a ventilation
system which can be adjusted at the bottom
(Fig. 19). To adjust the ventilation system, turn
the switch into a respective mode (on/off).
Carrycot hood, foot cover
The carrycot features a conveniently foldable
hood protecting a child from wind, sun, snow
and rain elements. Memory buttons adjust the
stroller's hood positioning. There is no need to
press both buttons in order to fold the hood;
it is sufficient to consequently press a button
on the first stage of the adjustment all the way
in (until you hear a distinctive sound), then
press the button on the second stage of the
adjustment and fold the hood with one hand
(Fig. 20). To unfold the hood, you should simply
pull it until it is fixated in the required position.
The carrycot is equipped with an additional
handle for transportation (Fig. 21). The carrycot
is also equipped with a foot cover, which is
attached to the front side of the carrycot and
fixated with a zipper and magnets (Fig. 22). The
carrycot's hood is ventilated. For ventilation,
unstrap the zipper and turn the bottom part
back (Fig. 23).
Additionally, the carrycot is equipped with a
mosquito protection net (Fig. 24) and a rain
8
All manuals and user guides at all-guides.com
protection cover (Fig. 26), which fits both the
carrycot and the seat unit (Fig. 25).
Seat unit
To mount the seat unit, place its adapters into
the adapter pockets located on the frame's
inner side (Fig. 27). The seat unit's adapters are
blocked automatically. There are two possible
positions for the seat unit: facing the direction
of travel and "facing mom." It is also possible to
take the textile part of the seat and wash it. To
do so, you should dismantle the textile kit from
the plastic base by carefully unfastening all the
fixating buttons and removing safety belts. To
remove the seat unit from the frame, press the
memory adaptor buttons and lift it up (Fig. 28).
The back of the seat unit can be adjusted for
height with the help of the handle at the back
side of the seat (Fig. 29).
Seat unit hood, foot cover
The seat unit features a conveniently foldable
hood protecting a child from wind, sun, snow
and rain elements. To set up the hood, adjust its
back side to the seat's back by using the buttons
(Fig. 42) and insert the outstanding hood straps
into the correlating spots on the strolling block,
until you hear the clicking sound (Fig. 43). To
take off the hood, you need to slightly untuck
the straps fixator on the seat by using a delicate
instrument until the strap is fully out (Fig. 44), take
it out of the seat and then disconnect the hood
from the strolling block by using the two buttons
in the back side of the strolling block (Fig. 42).
The hood position is adjusted by pressing on its
to (Fig. 30). The seat unit is also ventilated. To do
so, unstrap the zipper, turn up the upper part, and
lower the hood (Fig. 31).
The strolling block's seat is also equipped with