Auto Standby Function - Magnat PRIME SHADOW Notas Importantes Sobre La Instalación / Certificado De Garantía

SYSTEM INSTALLATION (FIG. 1)
Connecting the power supply:
Included in delivery is an external mains adapter (110 - 240 V / AC 50/60 Hz).
1. Connect the output cable (jack connector) of the external mains adapter to the power supply jack of the PRIME SHADOW (6).
2. Insert the mains adapter into the socket.
Connecting an audio source to the audio input AUX IN:
Use an audio cable (3.5mm jack) (not included in delivery) and connect the audio output of the audio source to the audio input AUX IN (7).
Connecting the device to a Bluetooth audio source:
Select the PRIME SHADOW's Bluetooth input (see also OPERATION).
Enable Bluetooth on your smartphone or other device.
Make sure the LED indicator is blinking rapidly blue. (If it isn't, switch the speaker off and on again.)
Choose MAGNAT PRIME SHADOW from the pairing options on your smartphone. (If it's not in the list, choose "Scan" from your phone's
Bluetooth menu.)
When it's finished pairing and connecting to your smartphone, the LED indicator is blue.
Note:
• If you have previously connected a Bluetooth device, the MAGNAT PRIME SHADOW will automatically attempt to re-establish a connection
with this device.
• The process of enabling Bluetooth and connecting varies from device to device. See your device's owners manual for more information
and specific instructions.
• The MAGNAT PRIME SHADOW supports the „Qualcomm
also supports this standard, „Qualcomm
connection.
OPERATION (FIG. 1)
Speaker controls:
(1) ON/STBY/:
Switches the device on when it is in the standby mode. Conversely the device can be switched from power operation to the
standby mode
(2) VOLUME/SOURCE:
Rotary/push button for volume control and source selection.
(3) LED status display:
• red: standby mode
(4) LED status display AUX:
• white: analogue input active
(5) LED status display BT:
• blue: Bluetooth input active, connected to the source device
• blue, flashing: Bluetooth input active, device in pairing mode

AUTO STANDBY FUNCTION

The unit has an Auto Standby function that automatically switches the device to stand-by mode if no audio signal is detected on the
inputs or if there is no Bluetooth pairing over a period of approx. 15 minutes. This function implements an EU energy-saving regulation
(1275/2008 EC), reducing power consumption if the device is accidentally left turned on after use.
aptX™" high quality audio transmission standard. If your source device
®
aptX™" will be selected automatically as the transfer mode when establishing a Bluetooth
®
10