Cleaning And Care - LIVARNO Z30845 Instrucciones De Montaje

Assembly / Cleaning and Care / Service / Disposal
Assembly
Note: Assemble the product on a scratch-resistant
floor that is sufficiently large. You may have to put
a blanket or the like down in order to avoid
damaging the product.
Note: This product requires wall mounting. Make
sure that you position the mounting material at the
right height. Otherwise you will not be able to
mount the product correctly.
Note: Assembly requires an electric drill with a
6 mm diameter drill bit and a screwdriver. Refer
to the operating instructions for your electric drill
before assembly.
Assemble the product in accordance with
Figs. A to M.
Note: Regularly check the stability of all connections
and retighten the screws regularly.

Cleaning and Care

Do not under any circumstances use corrosive or
abrasive cleaning agents. These may damage
the product.
Clean the product with a dry, non-fluffing cloth.
To remove more stubborn dirt, use a damp
cloth and, if necessary, a mild cleaning agent.
Service
GB
Service Great Britain
Tel.: 0871 5000 720
(0,10 GBP/Min.)
e-mail: milomex@lidl.gb
IAN 64099
14 GB/MT
64099_liv_Kommode_Content_LB5.indd 14
MT
Service Malta
Tel.: 80062230
e-mail: milomex@lidl.mt
IAN 64099
Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
Product description:
Chest of Drawers
Model No.: Z30845
Version: 07 / 2011
11.05.11 16:25