Publicidad
Idiomas disponibles
Idiomas disponibles
3-in-1 Clutch / Variator Tool for Piaggio
FEATURES
- to be used as Piaggio OEM 14569-PI
- pin distance: 55 mm
- wrench size: 34 mm
- suitable for many models of following manufacturers:
Aprilia, Derbi, Gilera, Italjet, Peugeot, Piaggio, Vespa
- made of stainless steel
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool is used to loosen the clutch nut, block and dismantle the variator and the clutch bell.
SAFETY INFORMATIONS
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
•
Use the tool for the intended purpose only.
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
•
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
USE
ENVIRONMENTAL PROTECTION
Dispose of this product at the end of its working life environmentally. Recycle unwanted
materials instead of disposing of them as waste. All tools, accessories and packaging
should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment. Contact your local solid waste authority for recycling
information.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8729
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
