IARP VIC 4SK Instrucciones De Empleo Y Manutención página 11

TEMPERATURE SETTING AND CONTROLS
MECHANICAL VERSION
The appliance is provided with a thermostat for automatic maintenance of the temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold enough should the knob turned.
The numbers on the regulation plate are not related to temperature values but only to knob reference
position: a higher number corresponds to a lower temperature.
ELECTRONIC VERSION
Each refrigerating appliance is provided with an electronic thermostat (1) for automatic maintenance of the
temperature inside the tank. This temperature adjuster is gauged by the factory and should not be touched
by the user. Only if the average internal temperature is too cold or not cold you can proceed as follows:
- press for 3 sec. the (Set) key in order to see on display the temperature set point.
˄
- press the ( ) key or the (
- press the (Set ) key in order to store the new temperature set point.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT
IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a
dealer providing this service. Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from inappropriate disposal
and enables the constituent materials to be recovered to obtain significant savings in energy
and resources. As a reminder of the need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.
˅
) key in order to increment or decrement the temperature set point.
-11-
1
CONTROLS
1) Thermostat
2) Thermometer
2
1