Celestron NexGO DX Manual De Instrucciones página 7

Using your Bluetooth Remote
1
To insert or replace the battery, place your thumb in the center of
the back cover, pressing inward and sliding downward remove
the battery door. The CR2032 battery should be inserted with
the positive (+) side facing upward. Replace the cover.
3
Using the Bluetooth settings on your phone, pair the device
called "22035".
5
If your camera is in video mode, you can press the button once to
start recording and again to stop the recording.
ENG7 | ENGLISH
UNIVERSAL SMARTPHONE ADAPTER AND BLUETOOTH REMOTE
2
Press and hold the button on the remote for 5 seconds. A blue
light will turn on and, after a few seconds, start to blink. The
remote is now in pairing mode.
4
Open your camera app. Press the button on the remote to trigger
the shutter on your phone
© 2021 Celestron • All rights reserved
celestron.com/support/warranties
INSTRUCTION MANUAL