TechLine Z-43 Manual De Instrucciones página 33

All manuals and user guides at all-guides.com
2. Place the cuff on the wrist. Press the key. All digits will light up,
checking the display functions. The checking procedure will be
completed after about 2 seconds.
3. After all symbols appear, the display will show a blinking "0". The
monitor is "Ready to Measure" and will automatically inflate the cuff
to start measurement.
4. When the measurement is completed, systolic pressure, diastolic
pressure and pulse will be shown simultaneously on the LCD screen.
The measurement is then automatically stored into the pre-
designated memory zone.
33