Phase Linear PCD120U Manual Del Usuario página 8

OPERATING INSTRUCTIONS
Display Selector (DSP)
9
This unit can display either the clock time or
radio frequency/CD player functions. Ordinarily,
the radio frequency or CD player track
indication is displayed, but the display can also
show the time when the DSP button (9) is
pressed. The time will then be displayed for
approximately 5 seconds after which it will
return to the radio or CD player function display.
The correct time of day can also be set into the
unit by pressing the DSP button.
Setting the Clock
To set the clock, perform the following steps:
1. Turn the vehicle ignition and radio on.
2. Press and hold the DSP button (9) until
the time display flashes.
3. Within 5 seconds,press the VOL
(3a) to adjust the minutes to the desired
setting.
4. Press the VOL button (3b) to adjust the
hour and the "AM"/"PM" indication to the
desired time.
Five seconds after the last hour or minute
adjustment has been made, the time will be set
in the unit and normal operation will resume.
All manuals and user guides at all-guides.com
PWR
button
SEL/MENU
MOD
3a
AM / FM / CD RECEIVER
TRACK MUTE
> > >>
3b
8
9
/
PCD120U
SCN RPT
LOU
PCD120U