All manuals and user guides at all-guides.com
OSD description
►
Press the
button to select the blue coloured icon. The corresponding setting window
Image Adjust) is displayed (on the right-hand side).
The first function (Phase) is blue coloured.
► If necessary, press the
or
6
► Press the – or + button to adjust the value for the selected function.
► Press the
button to apply the changes and exit the function.
► Press the
button to discard the changes and exit the function.
► If necessary, press the button
main menu.
If you want to change other settings, select the corresponding function from the OSD main menu. All
possible adjustments of the main menu are described in the following.
The OSD menu for analogue monitor operation is described in the following. During digital
i
operation some functions are not available, as they are not required due to the digital
transmission technology used.
Adjusting the brightness and contrast
Calling the Brightness / Contrast setting window
Brightness
Setting the brightness of the display
With this function you change the brightness of the background lighting.
Contrast
Setting the contrast of the display
With this function you modify the contrast of bright colour tones.
Black level
Setting the brightness of the display
With this function you modify the contrast of dark colour tones.
Setting the brightness of the display
Auto level
With this function you can automatically set the contrast.
Press the
button to activate the function.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
i
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
button to mark another function.
5
or
to mark another function or press the
6
5
(here:
button to exit the