Specifications - Phonic MAX 860 PLUS Manual Del Usuario

SPECIFICATIONS

Stereo Mode (driving both channels)
8Ω EIA 1kHz 0.1%THD*
4Ω EIA 1kHz 0.1%THD*
Bridge Mono Mode
8Ω EIA 1kHz 0.1%THD
All Models
Output Circuitry
Input Aensitivity @ 8Ω
Distortion (SMPTE-IM)
Noise (unweighted 20Hz-20KHz below rated output)
Damping Factor
Frequency Response
Input Impedance
Cooling
Connectors (each channel)
Indicators
Controls
Front panel
Rear panel
Protection Circuitry
Power Consumption
Power Requirement (depends on region)
Dimensions (WxHxD)
Weight
MAX 860 1500
MAX 860 PLUS
<0.01%
10.16 kg (22.4 lbs)
All specifications are subject to change without notice.
2500
MAX 1500 PLUS
Continuous Average Output Power Per Channel
200W 280W
300W 450W
Continuous Average Output Power
600W 900W
Class H
1.23V (+4dBu)
100dB
>300 @ 8Ω
20 Hz-20KHz, +0/-1dB; -3dB points: 5Hz-50KHz
20 K Ω balanced, 10 K Ω unbalanced
Continuous variable-speed fan, front-to-rear air flow
Input: XLR; Output: Speakon and binding posts
Power: Blue LED; SIGNAL: Green LED; PEAK: Red LED
CH1 & CH2 GAIN knobs with 21 detents
Slide switches: Limiter On/Off;
Operation mode: Parallel, Stereo, Bridge Mono;
Current reset break switch
Short circuit, thermal, subsonic, RF protection,
Output DC offset, Power on/off muting
600W 900W
100~120VAC, 220~240VAC, 50/60Hz
482 x 88 x 415mm (19" x 3.46" x 15.9")
11.15 kg (24.6 lbs)
MAX 2500 PLUS
500W
750W
1500W
<0.02%
1500W
13.24 kg (29.2 lbs)
7