Manual toastit
Congratulations with your new high-quality 7 in 1 memory card reader better
known as the "Toastit™" by boynq
®
design and quality.
Contents of the box:
•
7 in 1, USB 2.0 Card Reader (actual number is 27 in 1)
•
USB cable
•
Instruction Manual
Product details:
1)
Card slot for xD memory cards
2)
Card slot for Memory Stick (MS), MultiMedia Card (MMC),
Secure Digital (SD)
3)
Card slot for Compact Flash type I & II and Microdrive
4)
USB cable (0,7 m), USB A-type to USB mini B-type
Installation:
The Toastit™ is very easy to install. Insert the USB plug of the supplied USB
cable into the designated port of your computer and into the Toastit™. Upon
first connection the computer operating system will recognise the Toastit™
automatically and start configuring the Toastit™ for usage. When initialization
is completed the computer will give a notification that the device is ready for
use. Maybe a restart of the computer is needed for proper functioning. When
the Toastit™ is connected to the computer 3 extra drives are visible in 'Windows
Explorer' for accessing the memory cards directly. The Toastit™ is now ready for
use.
If any of the card reader ports fails to connect, please remove all devices from the
Toastit™ and reconnect the ToastIt™ to the computer. It might be caused by too
much electric current. Please reboot the computer before connecting any devices
to the Toastit™. After restarting the computer the Toastit™ should be functioning
normally again. Since the Toastit™ is powered by the computer USB port, it will
only be operational when the computer is on.
Memory cards can be inserted in the corresponding designated ports on the
Toastit™. Card type indications are printed underneath or above the card slots.
For use with xD, MS, MMC and SD, please hold the card with the copper contacts
towards you while inserting the card in the designated slot. Please make sure the
card references can be read normally (not upside down). The Toastit™ can hold a
different memory card in each slot at the same time.
Note:
•
The Toastit™ is a self powered card reader and does not need any external power adapter to work.
•
Please connect the Toastit™ to a USB 2.0 port to ensure the highest possible data transfer. If the
Toastit™ is connected to a USB 1.1 port, the computer might give the notification; "This USB device
can work quicker, please connect to a USB 2.0 port"
4
All manuals and user guides at all-guides.com
English
. The first card reader with a key focus on
Manual toastit
System requirements:
•
A computer platform with a USB 1.1 or 2.0 host connector port
•
PC with operating system Windows 98 SE or above
•
Mac OS 8.6 or above
Specifications:
•
Retro design 7 in 1 memory card reader, USB 2.0 (actual number 27 in 1)
•
High speed data transfer (480 Mbps on USB 2.0)
•
Plug & Play, no software required
•
Self-powered USB card reader, no adapter required
•
Compatible with Memory Stick (MS, MS Pro, MS Duo, MS Pro Duo, MS Pro
Ultra II, MS Magic Gate, MS Pro Magic Gate, MS Duo Magic Gate, MS Pro Duo
Magic Gate, MS Memory Select Function, MS ROM, MS Pro Duo Ultra II, MS Pro
Extreme), MultiMedia Card (MMC, MMC 4.0, RS-MMC, RS-MMC 4.0), Secure
Digital (SD, mini SD, SD Ultra II, SD Extreme), xD memory cards, Compact
Flash type I & II (CF I, CF II, CF I Ultra II, CF I Extreme) and Microdrive
•
Detachable magnetically shielded USB 2.0 cable included (0,7m)
•
Ideal for travelling purposes as well as home use
•
Dimensions: 55mm H x 90mm L x 30mm W (2,17" x 3,54" x 1,18")
•
Weight: 62 grams (0.137 Lbs)
Toastit™ is a trademark of youSP BV, The Netherlands.
All rights reserved.
Please visit www.boynq.com for troubleshooters or other products within the boynq
English
collection.
®
5