Tool Change With Sds Chuck; Technical Specifications - Metabo BHA 18 LT Manual Original

17026950_1209 BHA 18 LT ENTWURF für SLG.book Seite 13 Donnerstag, 3. Dezember 2009 2:45 14
Select the desired operating mode by turning the
switch button (4). To turn, push in the lock (5).
Drilling
Hammer drilling
Avoid levering with the machine when a drill
bit is fitted.
8.8

Tool change with SDS chuck

Before fitting, clean tool shank and apply
special grease (accessories order no.
6.31800)! Use only SDS-plus tools.
Inserting the tool:
Turn the tool while inserting until it locks into
place. The tool is locked automatically.
Removing the tool:
Turn tool lock (2) in direction indicated by arrow
(a) and remove tool (b).
9 Tips and Tricks
Only moderate pressure is required for hammer
drilling. Applying a high degree of pressure does
not increase performance.
When drilling deep holes, remove the drill bit peri-
odically from the hole to remove dust.
When drilling in tiles and other brittle materials:
Set the operating mode to
10 Maintenance
The vent slots of the machine should be cleaned
periodically.
11 Accessories
Use only genuine Metabo accessories.
All manuals and user guides at all-guides.com
If you need any accessories, check with your
dealer.
The dealer needs to know the exact model desig-
nation of your power tool in order to select the
correct accessory.
See page 4.
A Chargers
B Battery packs with different capacities.
Use battery packs only with voltage suitable
for your power tool.
C Metabo carrying strap
D Tools with SDS-Plus shank
E Connecting piece
F Geared chuck
G Twist drills for metal and wood
H Screwdriver bit
I Special grease (for lubricating the tool
shanks)
For a complete range of accessories, see
www.metabo.com or the main catalogue.
12 Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please enclose a description of the fault with the
power tool.
13 Environmental Protection
Metabo's packaging can be 100% recycled.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
These instructions are printed on chlorine-free
bleached paper.
"Drilling".
2002/96/EC on used electronic and electric
equipment and its implementation in national
legal systems, used power tools must be
collected separately and handed in for environ-
mentally compatible recycling.

14 Technical Specifications

Explanatory notes on the information on page 2.
Changes due to technological progress reserved.
ENGLISH
Only for EU countries: Never dispose of
power tools in your household waste! In
accordance with European Guideline
ENG
13