Jackery Explorer 290 Manual De Usuario página 3

P O W E R
LCD Screen Button
Press the power button to check the remaining battery.
AC Button / DC 12V Button / USB Button
Turn off each output by pressing its power button as it does
not turn off automatically or it will drain the battery out.
L C D
Power Level Percentage
Check the battery level by pressing the display button
before use. If battery is at a low level, charge first.
LCD screen flickers 10 times when battery capacity drains
to 20% and 10%.
Power of Input & Output (W)
If the Jackery Explorer' s total output exceeds 200W, it
will automatically shut off.
Please ensure the power consumption is less than 200W,
then press the power button.
Low & High Temperature Alarm
The Explorer 290 can power your devices at
temperatures ranging from -10~40°C (14~104°F). If your
working temperature is outside this range, the
Explorer 290 may stop working.
D C I N P U T
Wall Charger Car Charger
Solar Panels(optional)
LCD Screen Button LCD Car Port
USB Output
DC Input AC Output
C H A R G I N G
Here are some common devices and their power requirements for each charging port.
Car Port
Drone
Car Fridge (60W)
About 6 Recharges
About 19 Hours
AC Output
32" TV (60W)
12" Laptop(30W)
About 4.3 Hours
About 4 Recharges
USB Output
Smartphone (18W max)
Motion Camera (5W max)
About 29 Recharges
About 52 Recharges
Explorer 290 will be turned off automatically in 12 hours when being drawn under 10W power for power saving.
R E C H A R G I N G
Before use or storage, plug your Explorer 290 into the wall until it is fully chaged. If the LCD shows less than 20% capacity,
plug it into a power source, like an AC outlet or a solar panel, as soon as possible. There are four ways to recharge your
Jackery Explorer:
Wall Charger Car Charger
Around 5.5 Hours Around 6.5 Hours
CPAP Machine
About 6~21 Hours
100W Solar Panels
(Optional)
Around 5 Hours
(Depending on Weather)