ARDES Medicura m223 Folleto De Instrucción página 13

All manuals and user guides at all-guides.com
SYMBOLOGY
Class II Appliance
Conformity brand to the directive 93/42 CEE
0123
Manufactured in: Smart Choice - China
Distributed by: ARDES Spa - Via Spiazzi, 45 - Ponte Nossa (BG) italia
Important, see the instruction manual
To conserve in fresh and dry place
Temperature of storing: -10 ÷ 50 °C
Type BF appliance
ON
OFF
STAND-BY
Seria Number
SN
INSTRUCTIONS FOR USE
Clean the apparatus and accessories (11-12-13) as indicated in the "CLEANING AND
MAINTENANCE" section before using the apparatus for the first time.
Remove the cover by pulling it upwards and take out the medicine cup.
Fill the tank until the indicated level.
Inside the tank there is a sensory device that points out the water level and when this is insufficient
interrupts preventively the appliance functioning.
Fill the water tank up to the level indicated inside using tap water or preferably distilled water, at
a temperature of 20-30°C. If cold water is used, with temperature below 20°C, the nebulization
intensity will be lower, while the use of hot water, above 30°C, will cause higher intensity.
Change the water in the tank at every new application.
Fill the cup with the medicine and insert it in the tank. Do not exceed 10 ml, the maximum
capacity of the cup.
Dense medicines or medicines with a volume of 2 ml or less must be diluted with distilled water
or saline solution until obtaining a volume of at least 4 ml. (Seek medical advice).