Antlion Audio ModMic Pro Tips Manual De Instrucciones página 5

ModMic Wireless
LED Diagram
Yellow LED
(Charging/Battery)
Blue LED
(Power/Pairing)
State
Power On/Connected
Power Off
Muted
Unmuted
Charging
Fully Charged
Battery Low
Pairing (Mic & Dongle)
Connecting
Button
(Power/Mute)
Red LED
(Mute)
Red (Mute)
Off
Solid
Off
Off
indicates that the associated LED could either be ON or OFF, depending on its status.
LEDs and Pairing
How to Pair your ModMic Wireless
1. Connect the USB Receiver either directly of via
the USB extension cable (preferred).
2. Power on the the ModMic Wireless by briefly
pressing the power button.
3. If paired, the blue light on both will be solid.
4. If the blue light on either the receiver or the
ModMic is blinking slowly it means the device
is not detecting its paired counterpart.
5. To pair the devices, press and hold the buttons
for 5 seconds on both the ModMic and the
Antlion USB Receiver. The blue light will begin
blinking quickly on both devices.
6. Both devices should then blink slowly and
change to solid blue to indicate a connection.
The devices are now paired.
Blue (pairing on/off) Amber (battery/charge)
Solid
Off
Fast Blinking
Slow Blinking
Breathing
Solid
Blinking