No-Tour Instructions; Software Alliance Member Managed Systems; Engage Managed Systems - Schlage MT20W Guia Del Usuario

Credential Information
Schlage MIFARE Classic, 9000 Series credentials
L Note: The Schlage MIFARE DESFire or MIFARE Classic
credential must have at least 1k byte/8k bit of memory to
support no tour functionality.

No-Tour Instructions

Software Alliance Member Managed Systems

For a software alliance member managed electronic access system,
please reference their documentation to add no-tour credentials.

ENGAGE Managed Systems

One of the key features of a supported lock is the no-tour function.
By using the MT20W Enrollment Reader, smart credentials can be
assigned/registered to a user without visiting or gaining immediate
access to the lock. The next time the new smart credential is presented
to the supported lock, user access to the lock is updated.
1 Open the ENGAGE website and log into your account.
2
Select the "User" credential and click on "Add Credential."
3 Place the credential that needs to be assigned or changed.
4 You will hear a short beep confirming that the credential has
been scanned. The MT20W reader LED will turn green.
5
Remove the credential from the reader.
6 You will see that the credential is now available in the
existing credential list. The badge ID listed on the credential
(after the dash) is displayed in the stock list. Click on
"Refresh List" if the credential is not available in the existing
credential list.
7 Highlight the credential in the existing credential list and click
on "Save." The credential will now be in the user's credential
list.
8
Make access changes as needed within the ENGAGE web
application.
Schlage • MT20W Enrollment Reader User Guide • 7