Descargar Imprimir esta página

Duronic FFPS Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
Installing the Screen onto the Wall
13) Decide on a location that you would like to
install you screen. Using a pencil and spirit level,
mark your chosen location for the hanging screws.
14) Use the raw plugs provided, or find some suitable for your type of wall (i.e.
brick, plasterboard etc..) and install the screws using a Phillips screwdriver to
tighten them into place.
Please note: we have only included one type of raw plug with this kit. If your
wall requires something different ensure you get the appropriate fixings to
ensure that the installation will be safe and secure.
15) Use two people to hang the screen. Stand at
opposite ends of the screen to each other and lift it
gently into place onto the wall.
Ensure it is sitting properly on all four of the screws.
Cleaning
If the screen gathers dust, simply clean with a dry cloth or duster.
If the screen has a mark or stain that needs to be removed, use a wet cloth
with a mild soap to gently clean the screen. Use minimal pressure to prevent
damaging the fabric.
Do not use any abrasive chemicals or cleaning agents on any part of the
screen or casing.
10

Publicidad

loading